Free Recycled Sari Silk Christmas Tree Crochet Tutorial | KnitSilk Pattern 02
HANDMADE CHRISTMAS · FREE PATTERN 02 OF 10
A Christmas tree with its own colour story
Let textured sari silk bring character to a small festive tree for a table, mantel, gift or winter display. Colour and strand variation make this a project to explore through sampling rather than a promise of identical results.
This edition offers a revised written cone prototype alongside the supplied inspiration guides. Work slowly, count carefully and test the shape with your chosen yarn before making a set.
KnitSilk — Crafting Luxury. Handmade Christmas, with a silk twist.
Single crochet, increases and decreases.
Circle, turned edge and gradual taper.
Physical results and consumption unconfirmed.
Materials and preparation
- Recycled sari silk yarn.
- A suitable crochet hook and stitch marker.
- Tapestry needle and scissors.
- Optional stuffing, ribbon and a lightweight sewn star.
The artwork suggests a 4–5 mm hook as a starting range only. Adjust after sampling for workable, stuffing-tight fabric. Yarn thickness, texture and colour can vary. No tested project quantity is supplied; weigh your sample instead of assuming one ball makes a fixed number of trees.
Verified EU yarn option: red recycled sari silk
The matching knitsilk.eu listing identifies 100% recycled sari silk, 100 g per ball and approximately 50–70 yards. These are product quantities, not per-tree consumption. It describes a regular/bulky construction and recommends a 6–8 mm crochet hook, which differs from the artwork’s 4–5 mm starting range. Test the actual yarn and do not force an unsuitable hook size.
The product title identifies red, although one paragraph contains inconsistent black-colour wording. Check the shade before choosing materials. The card does not promise a multicolour or green variant.
Shop Recycled Sari Silk YarnUS crochet terms
| Term | Meaning |
|---|---|
| MR | Magic ring |
| sc | Single crochet |
| inc | 2 sc in one stitch |
| dec | sc2tog, single crochet two stitches together |
| BLO | Back loop only |
| st | Stitch |
| ×6 | Repeat the preceding sequence six times |
This EU edition uses US terminology throughout. For sc2tog, pull up a loop in each of the next two stitches, then yarn over and pull through all three loops.
Revised written cone chart
Work in continuous rounds without joining. Mark the first stitch and move the marker every round. Counts are arithmetically consistent, but physical results remain untested.
| Round | Instruction | Final count |
|---|---|---|
| 1 | 6 sc in MR | 6 |
| 2 | inc each stitch | 12 |
| 3 | (1 sc, inc) ×6 | 18 |
| 4 | (2 sc, inc) ×6 | 24 |
| 5 | (3 sc, inc) ×6 | 30 |
| 6 | (4 sc, inc) ×6 | 36 |
| 7 | sc each stitch BLO | 36 |
| 8 | Both loops, (4 sc, dec) ×6 | 30 |
| 9 | sc each stitch | 30 |
| 10 | (3 sc, dec) ×6 | 24 |
| 11 | sc each stitch | 24 |
| 12 | (2 sc, dec) ×6 | 18 |
| 13 | sc each stitch | 18 |
| 14 | (1 sc, dec) ×6 | 12 |
| 15 | sc each stitch; lightly stuff if desired | 12 |
| 16 | dec ×6 | 6 |
| 17 | sc each stitch | 6 |
| 18 | dec ×3, fasten off | 3 |
Thread the tail through the remaining loops, close gently, secure and weave in ends. Avoid overstuffing and check base stability. Both loops are used after round 7.
Five expandable steps
All five sketches are AI-generated conceptual aids, not exact stitch diagrams or tested-result photos. Follow written counts, not pictured rows.
1. Begin the base: rounds 1–3
Make a magic ring and work 6 sc. Tighten gently, secure the starting tail and mark the first stitch. Increase to 12 in round 2, then 18 in round 3. Check the count before continuing.
2. Enlarge the base: rounds 4–6
Follow the chart to reach 24, 30 and 36 stitches. Check flatness, counts and tension. The drawing does not supply a measured base diameter or exact row appearance.
3. Turn the edge and taper: rounds 7–13
Work round 7 in BLO to turn the edge. Return to both loops for round 8 and thereafter. Alternate the charted decreases and plain rounds, reaching 30, then 24, then 18 stitches. Stop increasing once the base is complete. Pictured rows do not replace written counts.
4. Support and close: rounds 14–18
Reduce to 12 stitches in round 14. Add light stuffing while the opening is accessible, if desired. Complete the chart to 6, 6 and finally 3 stitches. Close the remaining loops gently and secure ends without distorting the point. Do not pack the form so firmly that the base bulges.
5. Decorate and inspect
Sew a lightweight ribbon spiral and star securely. Avoid heavy toppers that pull the tree sideways. If making a hanging decoration, check the loop and the entire assembly’s strength. Do not rely on glue-only load-bearing joins. Inspect all attachments and remove loose fibres.
Second inspiration guide
Finish your own Christmas colour story
Consider red, multicolour, green-and-gold or neutral styling as design ideas, not a list of verified stocked variants. Use lightweight trims and allow the yarn’s variation to be visible.
For different sizes, sample and measure first. Hook choice, yarn thickness and changes to plain rounds affect the shape. Record and test adaptations; this article does not provide graded size instructions. The pictured 13 cm tree is not a guaranteed outcome.
Group sampled trees on a stable surface away from heat.
Add a lightweight decorative tree with a securely sewn attachment.
Combine different sampled heights with battery-operated lights.
Troubleshooting
| Issue | Check |
|---|---|
| Hidden stitches | Use markers, feel for stitch tops and count carefully. |
| Uneven taper | Check accidental increases and confirm each charted decrease. |
| Stuffing shows | Reassess fabric density on a sample; avoid overpacking. |
| Tree leans | Reduce heavy toppers and check stuffing distribution and base stability. |
| Irregular strand catches | Handle gently and check joins rather than pulling hard. |
Care and safety
Follow the yarn and trim labels together. Do not assume the assembled tree is machine washable; test care on a sample and store finished decorations dry.
This is decorative, not a child-safe toy. Keep cords, fibres and small parts away from children and pets. Keep the tree away from flames and hot surfaces; use battery-operated lights. Sew attachments securely and avoid glue-only load-bearing joins.
Frequently asked questions
Is this a tested pattern?
No confirmed physical testing is recorded. It is a revised editorial cone prototype with arithmetically consistent counts. Sample before making kits or promising results.
Why does the written chart differ from the infographic?
The supplied infographic chart makes a more rounded form than the pictured cones. The written version introduces a revised gradual taper and is not its transcription. Do not combine the charts.
How much yarn does one tree need?
Consumption is unverified. Make and weigh a complete sample. The product’s 100 g and approximately 50–70 yards describe one ball, not one tree.
Is a 13 cm tree guaranteed?
No. The size labels are concept guidance, not graded sizes. Yarn, hook, tension, stuffing and adaptations affect dimensions.
Do the buttons inside the images work?
No. They are static artwork. Use the separate shopping and series links in the written article.
Can I print or save a PDF?
Use your browser’s Print or Save as PDF option where available. Open the expandable steps first and check the print preview. There is no separate downloadable PDF or custom print control for this article.
Continue the series with Santa Pattern 01, or explore the plans in our Christmas collection announcement.